|
 |
|
|||||||||||
KW-1
Bait Tank Plumbing Kit| MFG Part # | Width x Length x Height | Gallons | Weight Full |
Check out at bottom |
| KA-24 | 20"DIA.X18"H | 24 | 192 | |
| KA-26 | 30"Lx18"Wx16"H | 26 | 208 | |
| KA-30 | 23"DIA.x18"H | 30 | 240 | |
| KA-50 | 29"DIA.x18"H | 50 | 400 | |
| KA-36 | 36 1/2"L x 18"W x 18"H | 40 | 320 | |
| PF-101 | (L)
Bracket mounting kit. (fits KA-24,26 and 30) |
|||
| PF-003 |
Quick Disconnect Mount Pads (fits KA-24,26 and 30) |
|||
| PF-105 | (L)
Bracket mounting kit. (fits KA-50) |
|||
| PF-004 |
Quick Disconnect Mount Pads (fits KA-50) |
|||
| KW-1 | Bait Tank Plumbing Kit |
For the do it yourselfer
Build your own Tank/ LBL aerator parts
Click on any part for more
info
Bait Tanks,
Chairs, Tuna Tubes, Leaning Posts are Oversize. Oversize Shipping Applies
 Click Above Photo To See More KeepAlive Systems |
 Keep Alive Aerator Pump |
 PORTABLE AERATOR KIT by Rule |
 Attwood Livewell Aerator Switch Switches pump on and off at time intervals |
| RULE / KEEP ALIVE
LIVEWELL PUMPS AT AT SAVINGS
|
Rule/
KeepAlive LIVEWELL PUMPS
Our KeepAlive Recirculating Kits, the Model 255 and Model 256 are the ideal systems for keeping bait and catch alive when trailering home, to another fishing site, or to the tournament weigh-in station.They dramatically increases the ability of your present system to sustain a greater number of fish. The
KeepAlive
Recirculating Kits can be used as a
back-up system when entering foul water by turning off the primary system
and leaving the KeepAlive
system running.
|
| Thru-Hull Mount |
Amp Draw |
Suggested Bait Tank Size (gals.) |
|
| Model 255 | 3. | UP TO 30 | |
| Model 256 | 3.5 | 35 TO 60 |
KODIAK
/
KeepAlive LIVEWELL'S
Built by livebait larry in 5 sizes,
the cats meow in tank technology
| KODIAK TANKS WITH KEEP ALIVE
AERATION PUMPS AT A SAVINGS READY TO FISH PACKAGES, READY BUILT BY LIVE BAIT LARRY THE INVENTOR OF THE KODIAK PROFLOW BAIT TANK
|
KODIAK
/
KeepAlive LIVEWELL'S
Built by livebait larry Our Kodiak KeepAlive Recirculating Tanks, the Model KAK-24, KAK-30, KAK-50 ROUND and Model KAA-26, KAA-36 OBLONG are the ideal systems for keeping bait and catch alive when trailering home, to another fishing site, or to the tournament weigh-in station.They dramatically increases the ability of your present system to sustain a greater number of fish. The
KODIAK/ KeepAlive
Recirculating TANK can be used as a
back-up system when entering foul water by turning off the primary system
and leaving the KeepAlive
system running.
|
| Model |
Pump Size |
Tank Size Shape |
Dimensions in inches width x length x height or diameter x height |
|
| KAK-24 | 700 | 24
gal round |
20 x 18 | |
| KAK -26 | 700 | 26
gal oblong |
16 1/2 x 28 x 16 | |
| KAK-30 | 700 | 30
gal round |
23 x 17 | |
|
KAK-36 |
1100 | 36
gal oblong |
18
x 36 1/2 x 18 no molded in hold down lugs |
|
| KAK-50 | 1100 |
50gal round |
29 x 18 |
 |
Model PF-101 Hold Down Brackets Black anodized (L) bracket bold to the molded in lugs on the tank and to your deck or swim step. Dimensions are 3/16" thick x 1" wide x 1 1/2" tall. They can be used alone or with the PF-003 quick disconnect pads shown below. |
 
|
MODEL PF-003 QUICK DISCONNECT PADS
Black anodized pads mount permanently to your deck of swim
platform. The (L) brackets shown above bolt to the top of
the pad. Each pad has 3 holes, the two on the outside are
for the screws that attach to the deck. The one in the
center (not visible in the photo) is threaded. The (L)
bracket sits on top of the pad and a 1/4" screw goes through
the (L) bracket and into the pad. When you want to remove
your tank simply unscrew the 4 machine screws and remove the
tank. The (L) brackets go away with the tank. |
| PF-101 | (L)
Bracket mounting kit. (fits KAA-24,26 and 30) |
|
| PF-003 |
Quick Disconnect Mount Pads (fits KAA-24,26 and 30) |
|
| PF-105 | (L)
Bracket mounting kit. (fits KAA-50) |
|
| PF-004 |
Quick Disconnect Mount Pads (fits KAA-50) |
