|
|
 |
Gas,
Diesel, Waste, Caddies
  
Gas
Caddy
(P93-2400) A
portable fuel system that holds up to 28 Gallons of fuel, and can be
rolled over land and then along a dock to your boat. The Gas Caddy is
easily moved on pneumatic tires which have nylon bearings preventing
sparks between bearings and the aluminum axle. Handle grips and the
proper design proportions ensure comfort-able, easy balance and
maneuverability when full. Features a vented cap and a 10' long, large
diameter U.L. Listed supply hose that facilitates rapid fuel transfer.
Hose is easily coiled on two brackets and neatly held in place while
transporting. A heavy duty 3/4" bronze ball valve is located at the
bottom of the tank. The 3/4" hose nozzle is spring-loaded to eliminate
possible leakage. Constructed of cross-linked polyethylene with a
molded-in baffle to provide strength and durability. Shown
with Optional Manual Pump (P932400P) that transfers fuel
easily above the height of the caddy. The Gas Caddy meets all current
USCG standards and meets UN and DOT specifications when used according
to Todd's instructions for transporting gasoline. The Gas Caddy bears
the UN marking, "UN3H1W". Available one per box in red only. Can be
shipped via UPS. 41"H, 27 1/2"W, 22 1/2"D |
Diesel Caddy
(P93-2401) The
Diesel Caddy contains all of the design features of Todd's Gas
Caddy and holds up to 28 gallons of diesel fuel. Optional
Manual Pump (P932400P) transfers fuel easily above the
height of the caddy. The Diesel Caddy meets all current USCG
standards and UN and DOT specifications when used according to
Todd's instructions for transportation of diesel fuel. Available
one per box in blue only. Can be shipped via UPS. 41"H, 27 1/2"W,
22 1/2"D |
|
Waste
Caddy
(P93-2402)
A portable waste removal
system that holds up to 28 gallons of waste, and can be rolled to a
dump station. Handle grips and the proper design proportions ensure
comfortable, easy balance and maneuverability when full. The Waste
Caddy is easily moved on pneumatic tires and features a vented cap, a
10' long, large diameter intake hose that facilitates rapid waste
transfer and a 3" slide valve for evacuation into a waste receptacle.
The intake hose has a fitting with the proper thread size to connect
to standard deck fittings (1 1/2" or 1 1/4") and a universal quick
disconnect fitting with a shutoff valve to control flow and eliminate
spillage. There are two brackets so the hose can be easily coiled and
neatly held in place while transporting. Available with a hand
operated Manual Pump (P93-2402) that transfers waste easily out of
your holding tank. Constructed of easily cleaned, polyethylene with a
molded in baffle to provide strength and durability. Available one per
box in gray only. Can be shipped via UPS. |
|
Bait
Tanks, Chairs, Ladders, Steps, Center Consoles Fuel And Waste Tanks, Tuna Tubes
and Leaning Posts are Oversize. Oversize Shipping Applies
Oversize Shipping Charge Applies
except on pump
|
