Nexmar | Bait

Rule 2000 GPH High Output Bait-Washdown Pump.
("This pump uses the same motor as the Kodiak K-2000 that I made when I owned Kodiak Marine prior to selling the company. When I sold Kodiak the new owners decided to discontinue the Kodiak K-2000. This pump is a direct replacement"<< Larry)
If you are looking for a pump to handle larger capacity bait tanks this pump may be just what you are looking for. Available in 1800 gph which can provide water for tanks up to 85 gallons as well as tuna tubes. Kodiak uses a Rule Industries pump with its own proprietary inlet base that allows the pump to be screwed directly onto the valve above the thru-hull. A molded in 3/4" female pipe brass insert in the base allows for maximum strength and water inlet. Completely water tight, corrosion free and whisper quite this pump will last for many years. Water outlet size for 1" hose.
Model 207F

Rule 1600 GPH Tournament High Output Bait Pumps.
Two New Models Both 1" Female Inlet, One With A Brass Base And One With Duel Port Design

livebaitlarry says: Just like the old Kodiak 1500 GPH pump that I made famous over 15 years ago. These 2 new models from Rule feature a 3 YEAR WARRANTY, low amp draw at only 5 amps, Heavy Duty long life motor, Anti Airlock Design,
1" Female Inlet For High Capacity,

Two models available in either plastic base duel port design or solid brass female inlet, both models have 1 1/8" outlet.

Model 209FDP duel port
Run bait pump and wash down pump off one thru hull

Here is how they work. The bait pump mounts direct to your shut off valve mounted to your thru hull. The pump comes with a 1/2" pipe plug in the port, remove the plug screw in a barb fitting and run a hose to your wash down pump to supply it water. Please note that you can only use a diaphragm style wash down pump such as a Flo-Jet or Shur-Flo as the diaphragm allows the bait pump to not suck air through it. The extra port in the Rule (FCDP) pump acts as a water source for your wash down pump only and does not put out pressure.

Model 209B
Solid Brass Base 1" Female Inlet shown on right

Both Meets NMMA Certification Requirements

Both Are Ignition Protected

Both Will Not Over Heat If Run Dry

Both Are Under 5 amp draw

Rule 3700 GPH High Output Bait/Washdown General Purpose Pump.

The Rule 3700 will run up to 3 large tuna tubes when plumbed through a manifold or up to a 120 gallon live well.. The input and out put of this pump is 1 1/2" requiring a 1 1/2" thru hull. The rule 3700 can also be used to provide all the water for the Kodiak Bonita tube tank, again through a manifold.

It must be mounted below the water line of the boat and as close as possible to the thru hull valve. Amperage draw is 15 amps.
MODEL 17A

Product: Rule A53D Rule 1800 Sump/Utility Pump with 8' Cord - 110 Volt AC

Rule submersible bilge pumps have set the standard for the industry for many years. Exclusive Rule moisture tight seals, compact, efficient, maintenance-free. Positive snap-lock strainer base, totally submersible, silent running, vibration less, ignition protected. Water-cooled motor, anti-airlock features, no burn-out when dry, stainless-steel shaft. This is a great pump for running your livewell back at the dock where you have 110 volts, just drop it into the water and run the hose to your livewell.

SPECIFICATIONS

Model No.	Capacity (GPH)	Operation	Volts	Watts	Cord Length	Weight	Discharge Connection	Accessories Included
53D	1800	Non-Auto	110 AC	100	8'	3.5 lbs.	1-1/8" dia.	Garden hose Adapter #68 - - -Elbow Adapter Pipe 1" #57