|
 |
Livebaitlarry
Kodiak/ Angler Aerator tanks
Perfect For Keeping Shad, Herring and Minnows alive
Go To Bottom Of Page To Check Out
|
| RULE / KEEP ALIVE
LIVEWELL PUMPS AT AT SAVINGS
|
Rule/
KeepAlive
LIVEWELL PUMPS
Our KeepAlive Recirculating Kits, the Model 255 and Model 256 are the ideal systems for keeping bait and catch alive when trailering home, to another fishing site, or to the tournament weigh-in station.They dramatically increases the ability of your present system to sustain a greater number of fish. The
KeepAlive
Recirculating Kits can be used as a
back-up system when entering foul water by turning off the primary system
and leaving the KeepAlive
system running.
|
|
Thru-Hull Mount |
Amp Draw |
Suggested Bait Tank Size (gals.) |
|
| Model 255 | 3. | UP TO 30 | |
| Model 256 | 3.5 | 35 TO 60 |
  |
|
Perfect For Keeping Shad,
Herring and Minnows alive
KODIAK
/
KeepAlive
LIVEWELL'S
Built by livebait larry in 5 sizes,
the cats meow in tank technology
| KODIAK TANKS WITH
KEEP ALIVE AERATION PUMPS AT A SAVINGS READY TO FISH PACKAGES, READY BUILT BY LIVE BAIT LARRY THE INVENTOR OF THE KODIAK PROFLOW BAIT TANK
|
KODIAK
/
KeepAlive
LIVEWELL'S
Built by livebait larry Our Kodiak KeepAlive Recirculating Tanks, the Model KAK-24, KAK-30, KAK-50 ROUND and Model KAA-26, KAA-36 OBLONG are the ideal systems for keeping bait and catch alive when trailering home, to another fishing site, or to the tournament weigh-in station.They dramatically increases the ability of your present system to sustain a greater number of fish. The
KODIAK/ KeepAlive
Recirculating TANK can be used as a
back-up system when entering foul water by turning off the primary system
and leaving the KeepAlive
system running.
|
| Model |
Pump Size |
Tank Size Shape |
Dimensions in inches width x length x height or diameter x height |
|
| KAK-24 | 700 | 24
gal round |
20 x 18 | |
| KAK -26 | 700 | 26
gal oblong |
16 1/2 x 28 x 16 | |
| KAK-30 | 700 | 30
gal round |
23 x 17 | |
|
KAK-36 |
1100 | 36
gal oblong |
18
x 36 1/2 x 18 no molded in hold down lugs |
Due to size constraints with UPS/ Fed Ex we no longer sell this item |
| KAK-50 | 1100 |
50gal round |
29 x 18 | Due to size constraints with UPS/ Fed Ex we no longer sell this item |
 |
Model PF-101 Hold Down Brackets Black anodized (L) bracket bold to the molded in
lugs on the tank and to your deck or swim step. Dimensions
are 3/16" thick x 1" wide x 1 1/2" tall. They can be used
alone or with the PF-003 quick disconnect pads shown below. |
 
|
MODEL PF-003 QUICK DISCONNECT PADS
Black anodized pads mount permanently to your deck of swim
platform. The (L) brackets shown above bolt to the top of
the pad. Each pad has 3 holes, the two on the outside are
for the screws that attach to the deck. The one in the
center (not visible in the photo) is threaded. The (L)
bracket sits on top of the pad and a 1/4" screw goes through the
(L) bracket and into the pad. When you want to remove your
tank simply unscrew the 4 machine screws and remove the tank.
The (L) brackets go away with the tank. |
| PF-101 | (L)
Bracket mounting kit. (fits KAA-24,26 and 30) |
|
| PF-003 |
Quick Disconnect Mount Pads (fits KAA-24,26 and 30) |
|
| PF-105 | (L)
Bracket mounting kit. (fits KAA-50) |
|
| PF-004 |
Quick Disconnect Mount Pads (fits KAA-50) |
