Transom-Mount
Bait & Washdown Pumps With
E-Z Lock Tab For Trailer Boats
With the
Aqua-World E-Z Release Mounting Bracket there is no priming bulb
needed and no noise! Simply mount the E-Z Release Bracket
underwater on the transom, flush with the bottom of the boat.
The submersible Rule pump, in a cup assembly, slides into the
bracket; snapping into a locking position. The pump is easily
removed by pushing the Flex-Tab forward and pulling the pump out
of the bracket.
Water is pumped through the filter slots and supplied directly to
the bait tank or bag above. Pump includes a 6 foot wire leads and
accepts 3/4" ID hose.(EZ-1100 accepts 1 1/8" ID hose or adapts to
standard garden hose thread with included snap-on fitting
The built-in downward angle of the bracket allows water pickup
while moving.
click on photo for larger view
 
Click above For"
Excellent" Installed Photos
|
Mounting
plate shown to right in photo above
mounts to boat, pump and water pick-up cup slide and
lock in place for e-z removal. Water pick-up shown
in lower photo.
|
 
click on photo for larger view
Note how the bottom edge of the bracket follows the edge of the
bottom of the boat and is not mounted flat like you mount a
transducer.
|
 |
Transom
Mount Package
This convenient kit includes all the accessories, hose and
fittings that you need to install your EZ pump on any boat.
Matched with a Kodiak or Aqua World Bait Tank, this system will keep
your bait alive longer than any system, and we guarantee it or
your money back. Kit includes: E-Z transom mount bait pump
and mounting hardware. 8' of nylon reinforced vinyl hose,
ratchet-style hose clamps, nylon hose fitting and wire
tie-downs. |
|
|
Transom
Mount
Package |
Flow
Per Min. |
Amperage
Draw |
Suggested
Bait Tank Size (gals.) |
|
| EZ-360P |
3.4 |
1.8 |
7
to 16 |
|
| EZ-500P |
5.0 |
2.3 |
17
TO 30 |
|
| EZ-700P |
8.8 |
3.5 |
30
to 40 |
|
EZ-1100P
w/ 1" hose |
10.5 |
3.9 |
37
to 52 |
|
|
