|
 |
Everything on this page is closeout priced while supply last
livebaitlarry O-Ring Sealed Brake Wheel Cylinder
| livebaitlarry's new O-ring sealed cap replaces the dust cap with a 300 series stainless steel machined cap that has two O-rings one for the brake fork and the other seals the cylinder itself. The cylinder also comes with a stainless piston and a stainless snap ring to hold the cap in place. The two O-rings seal out all moisture and contamination, and may be changed when brake shoe replacement or bearing replacement is required. The cylinder is packed with Dow Corning Silicon Lube inside the cap and a special Teflon anti-seize compound for the bolts and cylinder fittings and stainless mounting bolts for your wheel cylinder. Remember to order right and left sides. |
 |
What Good Are Your Brakes If You Can't Adjust Them.
 |
livebaitlarry's stainless O-ring sealed star adjuster is machined from 300 series
non-corrosive stainless steel. An O-ring inside the body prevents water
and moisture from entering into the threaded area plus holds in a special Teflon
lubricant. Available for 8" and 10" backing plates. |
Check Out At Bottom Of Page
| MFG Part # | Description | Brake Size |
mfg. suggested list |
|
| SA-12 |
Star Adjuster |
12" | $38.00 | |
| SA-10 | Star Adjuster | 10" | $39.00 | |
|
WC-1012R
|
Wheel cylinder complete right and left |
10" & 12" |
$59.95 |
|
U.S. patent # 6,408,992
Check Out At Bottom Of Page
| MFG Part # | Description | Brake Size | |
| 4499999 | Spray Fitting Knobs, high temp Acetyl | each |
Check Out At Bottom Of Page
